 Your current position: Home >> Matters needing attention in the use of atomic gray modulationMatters needing attention in the use of atomic gray modulationPublished by：2021-8-4 Categories:Industry news Viewed by: 5483 times Atomic ash is what we often call putty. It is usually used for repairing automobile, substrate pits and other industries, but it is not just for us to apply it directly. We need to pay attention to some matters when using it. Prepare the atomic ash first, harden it according to the instructions, purchase the component viscosity ratio of atomic ash, and mix it with the fusion agent for blending. Generally, it needs to be used within 10 minutes after the blending. The atomic ash will dry and harden after a long time, so it can't be used again.
Before use, we must polish the surface of the repaired items, strive to polish them smooth and flat, and then fill the atomic ash into the place to be repaired. Here, we should pay attention to pressing tightly during filling to prevent loosening and falling off.
After the atomic ash is filled, the excess part should be scraped off immediately with a scraper or leveling, otherwise it will be difficult to scrape when it is dry. Grinding should be carried out after the atomic ash is completely dry. Of course, the air drying time of atomic ash will be longer in rainy weather.
The manufacturer of atomic ash specially reminds: pay attention to safety during operation. Never penetrate into your eyes. Once infiltrated, you need to wash it with clean water immediately.
|
 |
 |
About us |
|
Product Categories | |
Contact way Address: 268 Hongchang Road, Changxing County, Huzhou City, Zhejiang Province |
| Copyright © 2020 Changxing Baodi Environmental Protection Technology Co., Ltd all reserved | Web Admin --> >> |
Home